| TX Fluorescent Pigment |
Being produced with advance international technology, TX series exhibits many excellent properties: briliant clean fluoresce, superior tinting strength,hairlike particle,well-proportioned in chroma,etc. DX series is thus used in widest range of application such as extrusion,injection molding and blow molding in manufacturing of all kinds of plastics,such as toys,safety equipment,garaphic sheeting, display packing,vacuum-formed products,banners,and many other eye-catching substance,it is also usable in water systems where prolonged shelf-life is not required.
It is suitable for the plastic which requires processing temperature is under 195℃ |
| Characteristics |
Density
(g/cm3) |
Average
particle Size(um) |
Softening
point(℃) |
Decomposition
point(℃) |
Oil
absorption(%) |
| 1.36 |
<15um |
120-130℃ |
>230℃ |
56% |
| Available color selection |
| Pink |
Cerise |
Red |
Red orange |
Orange |
| TX-11 |
TX-12 |
TX-13 |
TX-14 |
TX-15 |
| Orange yellow |
Yellow |
Green |
Blue |
Magenta |
| TX-16 |
TX-17 |
TX-18 |
TX-19 |
TX-21 |
| TZ Fluorescent Pigment |
Being produced with advance international technology, TZ series has good tinting strength,excellent heat stability,broad compatibility.
It is suitable for the plastic which requires processing temperature is 185℃-300℃ |
| Characteristics |
Density
(g/cm3) |
Average
particle Size(um) |
Softening
point(℃) |
Decomposition
point(℃) |
Oil
absorption(%) |
| 1.30 |
<25um |
145-155℃ |
>300℃ |
56% |
| Available color selection |
| Pink |
Cerise |
Red |
Red orange |
Orange |
| TZ-11 |
TZ-12 |
TZ-13 |
TZ-14 |
TZ-15 |
| Orange Yellow |
Yellow |
Green |
Blue |
Magenta |
| TZ-16 |
TZ-17 |
TZ-18 |
TZ-19 |
TZ-21 |
| TP Fluorescent Pigment |
Being produced with advance international technology, TP series is based on a thermoset resin, which has superior tinting strength and strong solvent resistence,
TP series is recommended in the application of various inks,paints,coating,PVC organic sols,plastic,water based latex system,caoutchouc etc. |
| Characteristics |
Density
(g/cm3) |
Average
particle Size(um) |
Softening
point(℃) |
Decomposition
point(℃) |
Oil
absorption(%) |
| 1.36 |
<15um |
NO |
>240℃ |
56% |
| Available color selection |
| Lemon Yellow |
Green |
Orange Yellow |
Orange |
Red orange |
| TP-10 |
TP-11 |
TP-12 |
TP-13 |
TP-14 |
| Red |
Cerse |
Pink |
Magenta |
Blue |
White |
| TP-15 |
TP-16 |
TP-17 |
TP-18 |
TP-19 |
TP-20 |
|
Caution
In the production of plastic, it is impossible to compeletely evaluate the effect,when the additive which containes ionic zinc,ionic magnesium,ionic calcium, and ionic steel mixes with TZ/TX/TP fluorescent pigments.They must be bested for satisfactory performance in the system intended to be used with them
Claim
The above information is offered as a recommendation only. the suitability of TZ/TX/TP pigments should be determined by evaluation in your finished application. |
|
|
